Omron SYSDRIVE RX Series User Manual page 201

Multi-function Output Terminal Selection
•You can allocate the following functions to any of multi-function output terminals P1 to P5 (C021
to C025) or the alarm relay output terminal (C026).
•Multi-function output terminals P1 to P5 provide open-collector output. The alarm relay output
terminal provides relay output.
•You can select NO- or NC-contact output for each output terminal with C031 to C035, or C036.
•If alarm code output is selected in C062 (refer to page 4-98), alarm code output (AC0 to AC3) is
provided via output terminals P1 to P3 (for 3-bit code), or via output terminals P1 to P4 (for 4-bit
code). The C021 to C025 settings are disabled.
Data Description
00 RUN: Signal during RUN
01 FA1: Constant speed arrival signal
02 FA2: Over set frequency arrival signal
03 OL: Overload warning
04 OD: Excessive PID deviation
05 AL: Alarm output
06 FA3: Set-frequency-only arrival signal
07 OTQ: Overtorque
IP: Signal during momentary power
08
interruption
09 UV: Signal during undervoltage
10 TRQ: Torque limit
11 RNT: RUN time over
12 ONT: Power ON time over
13 THM: Thermal warning
19 BRK: Brake release
20 BER: Brake error
21 ZS: 0-Hz signal
22 DSE: Excessive speed deviation
23 POK: Position ready
24 FA4: Set frequency exceeded 2
25 FA5: Set frequency only 2
26 OL2: Overload warning 2
27 FVDc: Analog FV disconnection detection
28 FIDc: Analog FI disconnection detection
29 FEDc: Analog FE disconnection detection
31 FBV: PID FB status output
32 NDc: Network error
Reference item
Signal during RUN
Frequency arrival signal
Overload limit/Overload warning
PID function
⎯
Frequency arrival signal
Overtorque
Momentary power interruption/Undervoltage
Torque limit function
RUN time over
Power ON time over
Electronic thermal function
Brake control function
0-Hz detection signal
V2 control mode selection
Orientation function
Frequency arrival signal
Overload limit/Overload warning
Window comparator function
PID function
Network error
4-2 Function Mode
Page
4-95
4-95
4-49
4-31
⎯
4-95
4-97
4-44
4-57
4-52
4-52
4-46
4-73
4-98
4-119
4-129
4-95
4-49
4-63
4-31
4-101
4-92
4