Omron SYSDRIVE RX Series User Manual page 172

4-2 Function Mode
(Example 1)
Main circuit P-N voltage
Vpn (V)
Output
frequency
4
(Hz)
Note: The main circuit DC voltage level, while the function is running, may fall below the b052 set value depending
Window Comparator (Disconnection Detection FVDc/FIDc/FEDc)
•The Inverter activates the window comparator output when the FV/FI/FE analog input value is
within the upper and lower limit levels of the window comparator. This function allows you to
monitor analog input based on the desired level (e.g. to detect a disconnection).
Parameter No.
C021 to C025
C026
b060 (FV)
b063 (FI)
b066 (FE)
4-63
Power recovery
Main circuit DC voltage
DC voltage kept constant
b050 = 02, 03
(Deceleration stop)
Power recovery
on the proportional gain and integral time settings.
Function name
Multi-function output 27: FVDc (analog FV disconnection
terminals P1 to P5
selection 28: FIDc (analog FI disconnection detection)
29: FEDc (analog FE disconnection
Relay output (MA, MB)
54: WCFV (window comparator FV)
function selection
55: WCFI (window comparator FI)
56: WCFE (window comparator FE)
Set an upper limit level.
Window comparator
FV/FI/FE upper limit level
Set an upper limit level.
(Example 2)
Main circuit P-N voltage
Vpn (V)
b052
b051
Time
Output
frequency
(Hz)
Time
Data
detection)
detection)
Setting range: 0 to 100
Lower limit: Lower limit level + Hysteresis
width × 2
Setting range: -100 to 100
Lower limit: Lower limit level + Hysteresis
width × 2
Main circuit DC voltage
at power recovery
DC voltage kept constant
b050 = 03 (Operation)
b050 = 02
(Deceleration stop)
Power recovery
Default setting
⎯
05
100
b052
b051
Time
Time
Unit
⎯
%