Christie M Series User Manual page 53

Section 3: Operation
Slide bars in menus – The current value for a given parameter, such as size or
vertical stretch, appears to the left of its slide bar icon (adjustment window). This
number often expresses a percentage, or it may have units associated with it (such
as pixels), depending on the specific option. Press L
gradually adjust the setting up or down—both the number and the length of the
bar change accordingly. Hold for continuous adjustment. Or press E
specific number entry via the keypad and then press E
"Direct" slide bars - For quick access, to Gamma, Brightness, and Contrast slide bars without traveling the
menu system. Press Gamma, Brightness, or Contrast to display the contrast slide bar.
Use the arrow keys to adjust a direct slide bar, or press E
then E or L
NTER
to save and return to your presentation.
E
XIT
You can still adjust a direct slide bar as usual if the display is turned off (see OSD or Menu
NOTES: 1)
Preferences menu) — the slide bar just won't be visible.
five seconds.
Check boxes - Conditions are present if its adjacent check box contains a
checkmark. To toggle the check box, highlight and press E
use R
A
IGHT RROW
is numbered, enter its number to immediately toggle the check box.
Pull-down lists – To see a pull-down list of options available for a given
parameter:
• Highlight the list and press E
• Enter the menu option number
Use the U
A
P RROW
an option from the list.
1. Serial (RS-232 IN) Options
2. Serial (RS-232 OUT) Options
3. Serial (RS-422) Options
4. Projector Address
5. Network Routing
6. Ethernet Settings
7. Broadcast Keys
8. Front IR Enabled
9. Rear IR Enabled
10. Wired Keypad Enabled
11. DMX / ArtNet Settings
If you prefer to quickly scroll through a list without first pulling it down, highlight the option and use L
or R
A K
RROW EY
or R
A K
RROW EY
a pull-down list to cancel any change.
3-10
or R
A K
EFT RROW EY IGHT
to check and L
K
EY EFT
; or
NTER
or D
K A
EY OWN RROW
Communications
Separate
F 3-8 E
IGURE
. Press E
A K
IGHT RROW EY
to jump between pages in an extra long pull-down list.
A K
IGHT RROW EY
/R A
EFT IGHT RROW
to save (or press E
NTER
and enter a specific number from the keypad,
NTER
to save (or E
A K
RROW EY
A direct slide bar disappears if it is not used within
2)
, or highlight and
NTER
to uncheck. If a check box
A K
RROW EY
to navigate up and down within the list. Press E
K
EY
P -D
XAMPLE OF ULL OWN
when the desired choice appears.
NTER
F
IGURE
to
K
EY
to activate a slide bar text box for
NTER
to cancel).
XIT
to cancel). When you are done, press
XIT
F
IGURE
1. Separate
2. RS-232 and RS-422 Joined
3. RS-232 and Ethernet Joined
4. All Joined
L
IST
NOTES: 1)
2)
020-100009-04 Rev. 1 (10-2009)
E
3-6
XAMPLE OF
S B
LIDE AR
3-7 E
XAMPLE OF A
CHECK BOX
to choose
NTER
EFT
Press L
EFT
Press E while in
XIT
M Series User Manual