Christie M Series User Manual page 31

Ethernet Communications
Refer to Section 3 Operation
Ethernet, and the Serial Command document provided in the Dealer Section of the Christie Website, PN 020-
100224-XX.
Connecting Multiple Projectors
RS-232 NETWORK:
1. Connect the controlling source to the RS-232 IN connector of the first projector in the network.
2. Using another serial communication cable, connect one end to the RS-232 OUT connector and the other
end to the RS-232 IN connector of the next projector.
3. Continue this pattern of connection with all projectors in the network.
network will only have a connection to the RS-232 IN connector, see
M Series User Manual
020-100009-04 Rev. 1 (10-2009)
F 2-20 C
IGURE
for further information about setting up and using a projector connected via
To connect multiple projectors in a network with serial communication:
F 2-21 RS-232 N
IGURE
RS-422
ONNECTING
ETWORK
Section 2: Installation and Setup
The last projector in the
NOTE:
Figure 2-21 RS-232 Network.
2-21