Christie M Series User Manual page 16

Section 2: Installation and Setup
Cooling and Air Vents
There are numerous air vents located around the projector. It is important these vents remain unobstructed.
Adequate airflow through the projector will prevent it from overheating.
Kensington Lock Attachment
Located at the rear of the projector to the left of the AC receptacle, is a Kensington lock attachment point. This
provides the ability to secure the projector against possible theft.
Lamp Door
The lamp doors are located at the side of the projector, which provides easy access to the lamp module for
replacement. Refer to
switch the lamp off when the door is opened. The lamp doors are provided with clear windows to indicate
when the lamps are on.
Front & Rear IR Sensors
The two IR sensors located on the projector receive transmissions from the IR remote from up to 100 feet
away. It is important to keep the transmission path to these sensors unobstructed for uninterrupted
communications with the projector. The rear IR sensor is located at the back of the projector between the status
LEDs and the front IR sensor is located next to the projector's front nameplate.
Projection Lenses, Lens Mount and Other Features
The projector includes a motorized lens mount that allows automated lens control and adjustment: vertical and
horizontal offsets, zoom and focus. The lens mount can be fitted with any one of the available optional lenses –
see Section 7 Specifications.
2-6
Section 5.4 Replacing the
F 2-5 A
IGURE BOUT THE
Lamps. The lamp doors are fitted with safety interlocks which
P - F
ROJECTOR RONT
V
IEW
M Series User Manual
020-100009-04 Rev. 1 (10-2009)