Christie M Series User Manual page 34

Section 2: Installation and Setup
To isolate just RS-422 communications, select "RS-232 and Ethernet Joined". In Figure
Panel, only projector #1 will respond to the RS-422 controller.
To isolate just Ethernet communications, select "RS-232 and RS-422 Joined"—only projector #1 will respond
via Ethernet.
System Integration - GPIO Connector
The GPIO connector on the input panel interface
interfacing a wide range of external I/O devices. Refer to
complete details on pin configuration and how to program the GPIO.
2-24
F 2-24 C
IGURE OMMUNICATING
Figure 2-20 Connecting
F 2-25 I
IGURE NPUT
T A P
O LL ORTS
RS-422, provides a method of
Appendix B:, Figure B-1- GPIO Connector
P
ANEL
Figure 2-25 Input
for
M Series User Manual
020-100009-04 Rev. 1 (10-2009)