Powering Down - Christie Roadster S+14K-J User Manual

11. Lock the setscrews, and re-check the boresight quality. Tighten the setscrew enough to ensure they will not
shift.

2.3.6 Powering Down

The projector can be powered down by using one
of the following methods:
Remote Keypad/Built-In Keypad
• Press and hold P
OR
• Press P
OWER
OR
• Press P
OWER
DOWN key.
NOTE:
second key is not pressed immediately, a
confirmation window will appear. The second key
press must be pressed within 1 second of the window appearing.
After powering down, the Status LEDs cycle and the LCD displays the message "Cooling Down", until
NOTE:
cool down is complete.
Web User Interface (UI)
1. From the Main Tab, Select Power>OFF.
down, see Figure
2. Select Yes.
J Series 2.0, 2.4, and 3.0kW User Manual
020-100707-01 Rev. 1 (10-2011)
OWER
twice
once, then immediately press the
For Step 2 and 3, if the
2-37.
F 2-36
IGURE
F 2-37 P
IGURE
A window will display for confirmation on powering
NOTE:
Section 2: Installation and Setup
D /W U
OWERING OWN EB
I
SER NTERFACE
2-29