Image Settings Menu - Christie M Series User Manual

Section 3: Operation
BLANKING (TOP, BOTTOM, LEFT, and RIGHT)
Crop the image so that unwanted edges are removed from the
display (changed to black). Blanking defines the size of the
Active Input Window, or area of interest. Range of adjustment
depends on the source resolution and other factors.
Blanking a PIP image resembles zoom. For
NOTE:
example, left Blanking zooms the right side of the PIP
image; Right Blanking zooms the left side. There are no
black bars.
Active Input Window 720x483
1. Top Blank
2. Bottom Blank
3. Left Blank
4. Right Blank
3.7

Image Settings Menu

Use the Image Settings menu to alter your main
image without affecting its size or position.
Changes made are applied immediately and are
saved when you exit the menu (press E
). Options not available for the projector
M
ENU
model or source are disabled and appear dim
(gray).
CONTRAST
"Contrast" increases or decreases the perceived difference between light and dark areas of your image (0-100).
For best results, keep close to 50. For best results, start with a low value and increase so that whites remain
bright but are not distorted or tinted, and that light areas do not become white.
lighting changes, an adjustment of Gamma is recommended (see below).
3-22
PIP Blanking
0
0
0
0
F 3-26 B
IGURE
or
XIT
F
IGURE
PIP Blanking
Active Input Window 720x483
1. Top Blank
2. Bottom Blank
3. Left Blank
4. Right Blank
PIP I
LANKING OF A MAGE
1. Contrast
2. Brightness
3. Yellow Notch Filter
4. Color Space
5. Video Options
6. Input Levels
7. Advanced Image Settings
F
IGURE
3-25 B P
LANKING OF A RIMARY
0
0
30
0
Image Settings
50.0
50.0
YPbPr(SDTV)
3-27 I S M
MAGE ETTINGS ENU
If the environment
NOTE:
M Series User Manual
020-100009-04 Rev. 1 (10-2009)
I
MAGE