About The Projector - Christie M Series User Manual

2.2.1 About the Projector

Built-in Keypad
The built-in keypad is located on the side of the projector. Use it similarly to the IR remote to control the
projector. An LCD display is located above the keypad for displaying projector status.
AC Receptacle
The AC receptacle is located at the back of the projector. Use this receptacle to plug in an appropriately rated
line cord.
NOTE:
details.
Adjustable Feet
Located on the underside of the projector are three adjustable feet. Raise or lower these feet when positioning
the projector to ensure it is level on all sides so the displayed image will appear rectangular without any
keystone.
Refer to 2.2.5 Adjusting Projector Height/Tilt
Input Panel
All source connections are made to the input panel located at the back of the projector. Any of the available
optional input cards can be installed in the 4 option card slots. The slots are labelled 1 through 4. All option
cards have LEDs to indicate their status.
M Series User Manual
020-100009-04 Rev. 1 (10-2009)
F 2-4 A
IGURE BOUT THE
The power switch is located above the AC receptacle. Refer to
P - R /S
ROJECTOR EAR IDE
for instructions on how to adjust the projector's feet.
Section 2: Installation and Setup
V
IEW
Section 7 Specifications for
2-5