4. Install instrument cluster trim plate and replace
two screw and plugs.
5. Con&t speed0 cable by turning coupling clock-
wise.
6. Install light .switch
button and heater control
knobs. I
7. Con+ct battery cable.
Manta I
1. Rem* instrument cluster trim plate.
2. Corndress retaining clips and remove switch. See
Figure iH-8.
Figure lH-8 . Removing Windshield Wiper Switch
INSTRUMENT
3. Disconnect wiring connector.
Installation
1. Connect wiring to switch.
2. Snap switch back into panel.
3. Replace instrument cluster trim plate.
Removing Instrument Cluster Bulbs - Opel 1900.
Manta
1. Remove instrument cluster assembly.
2. Replace bulbs from back ofcluster. See Figure lH-
9 .
Figure lH-9 Removing Instrument Clu'ster Bulbs
Installation
1. Replace bulbs in cluster.
2. Replace instrument cluster assembly.
Removing
and
Installing
Refer to Group 3, Section F.
Removal of Instrument Cluster Housing Assembly.
G T
Disconnect battery before making any electrical re-
pairs.
1. Disconnect battery cable.
2. Remove right access cover and remove screw. See
Figure lH-10.
PANEL
Ignition
Switch