Figure 7C-142
10. Install new converter housing oil seal using tool
J-21359. See Figure 7C-143.
Figure 7C-143
11. Check converter pump hub for nicks, burrs or
damage which could have caused oil seal to leak or
have worn bushing. Remove nicks and burrs.
12. Mark relative location of oil pump gears and
remove oil pump gears. See Figure 7C-144.
J-8092
CONVERTER
13. Using compressor tool J-2590-12 with adapter
J-21420-1 on reverse clutch retaining seat, compress
clutch return springs. See Figure 7C-146.
14. Remove snap ring using snap ring pliers such as
J- 8059. See Figure 7C-146.
15. Loosen compressor tool J-2590-12 and remove
springs.
AUTOMATIC
TRANSMISSION
Figure 7C-144
Figure 7C-146
clutch retaining ring and 24 reverse clutch