Opel 1900 1973 Service Manual page 146

inch deep socket, and remove it, together with inter-
mediate ring. See Figure 2E-4.
Installation
1. Install lock cylinder nut, together with intermedi-
ate ring, and fasten with a 13/16 inch deep socket.
See Figure 2B96.
2. Install luggage compartment lock so that the lock
cylinder rod rests in opening of the lock. See Figure
REMOVAL AND INSTALLATION OF LUGGAGE
COMPARTMENT LID
Removal
1. With a wooden wedge, remove letters and orna-
ment.
2. From below, push ornament out of luggage com-
partment lid.
REAR COMPARTMENT
Figure ZE-5 Lock Cylinder Rod Location
3. Remove rubber bumpers, lamp, lid lock, and lock
cylinder. See Figure 2E-6.
Figure 2E-6 Rubber Bumpers Lamp and Lock Location
4. Unscrew luggage compartment lid from hinges.
5. The luggage compartment lid must
between
that the gaps lid and adjacent surfaces are
almost equal.
LID
aligned so
be