Opel 1900 1973 Service Manual page 494

Figure 7C-228
Figure 7C-229
6. Install small end of manual valve link "A" into
selector lever and install valve body and transfer
plate assembly over guide pins. See Figure 7C-23 1.
7. Install selector lever roller spring and retainer.
Torque to 13-15 lbs. ft. The valve body bolts should
be torqued starting in the center of the valve body
and working outward. Torque to 13-15 lbs. Ft.
8. Install reinforcement plate to case. Torque to
13-15
9. Inspect oil strainer. If foreign matter is present,
install new strainer.
AUTOMATIC TRANSMISSION
BODY
Figure 7C-230
Figure 7C-231
Torque to 13-15 Ibs. ft.
11. Install new servo cover gasket.
12. Install servo cover. Torque to 17-19 lbs. ft.
Installation of Oil Pan and Gasket
1. Install new oil pan gasket.
2. Bolt oil pan to transmission case. Torque to 7-9
lbs. ft.
x-220