Major Repair; Fresh Air Outlet; Removal & Installation Kick Panel Fresh Air Outlet; Removal & Installation Blower Switch - Opel 1900 1973 Service Manual

MAJOR REPAIR

R E M O V A L A N D I N S T A L L A T I O N I N S T R U M E N T
PANEL FRESH AIR OUTLET
R e m o v a l
1. Remove instrument panel cover assembly. Refer
to Group 1.
2. Snap grille out of outlet.
3. Remove knob from lever and remove outlet.
Installation
1. Install outlet and knob onto lever.
2. Snap grille into outlet.
3. Install instrument panel cover assembly. Refer to
Group 1.
REMOVAL AND INSTALLATION KICK PANEL

FRESH AIR OUTLET

R e m o v a l
Using a screwdriver, carefully pry out outlet.
Installation
Install outlet.
REMOVAL AND INSTALLATION
SWITCH
R e m o v a l
Group 1.
2. Unscrew switch assembly from panel.
Installation
1. Screw switch assembly to instrument panel.
2. Install instrument panel assembly. Refer to Group
REMOVAL AND INSTALLATION
1. Remove lower radiator hose, drain, and collect
coolant.
2. Detach coolant feed (A) and return (B) hoses, in
engine compartment from heater core. See Figure
3. In engine compartment remove hood lock control
cable retaining clip and cable from lock bar. See
Figure 9A-6.
BLOWER
HEATER
4. Remove console shift cover between seats using
the following instructions:
a. Remove ash tray and remove two screws under it.
HEATER SYSTEM - GT
Figure 9A-5 Heater Hose Connections
Figure 9A-6 Hood Release Control Cable