OIL PUMP /'
ASSEMBLY
Figure 7C.155
37. Turn oil pump and reverse clutch assembly so
that oil pump face is facing up.
38. Install oil pump gears using the location mark
made before disassembly.
39. Check the end clearance of both gears to the oil
pump face. Clearance should be between .0005 to
Figure 7C-156
41.
Replace the oil pump assembly if the end clear-
ance is not within specifications.
SNAP RING
PLIERS
7 C 1 4 6
A U T O M A T I C
T R A N S M I S S I O N
Disassembly, Inspection and Reassembly of Second
Clutch
1. Remove ring gear retaining ring from second
clutch drum. See Figure X-157.
Figure 7C-157
2. Remove ring gear. See Figure 7C-158.
SECOND CLUTCH DRUM
Figure 76.158
3. Remove second clutch spacer plate retaining ring.
4. Remove second clutch spacer plate. See Figure
GEAR
:-157