Opel 1900 1973 Service Manual page 159

1973 OPEL SERVICE MANUAL
3. Install and align the remaining five listing wires.
If required, caulk retainers of 2nd and 5th listing
wires so that wires run in a straight line transversally
under the roof. See Figure 2G-9.
Figure ZG-10 3rd. 4th and 6th Listing Wire
Attachment
4. Lightly pull headlining
ment to the rear roof frame cross member and then
to the rear quarter pillars using rubber cement.
When pulling headlining toward rear be sure that the
listing wires are not pulled out of line. A folded cloth
Figure 2G-1 1 Lock Pillar Shield Attaching Screws
the rear and ce-
towards
should be used to smooth
of headlining.
5. Cut off surplus headlining along rear window, rear
quarter windows, and windshield, leaving enough to
tit under channels.
rubber
6. Cement surplus material to pinchweld flanges.
7. Cut off excess headliner around door openings and
cement trimmed edge to pinchweld flange using rub-
ber cement.
Figure 2G-12 Quarter Window and Lock Pillar Sealing
Strip
Figure 2G-13 Trim Pad and Retaining Button
cemented portions
down