1 F- 52 1973 OPEL SERVICE'MANUAL
Remove lamp housing.
2.
3. Disconnect electrical wires. See Figure lF-100.'
Figure 1 F-l 7 Rear Directional Signal. Stop and Tail'
Installation
1. Connect electrical wires.
2. Install lamp housing and lens.
Removal of Side Marker Lights
1. Completely remove adjacent rear directional sig-
nal lamp.
2. Through directional signal limp
marker lamp assembly can be removed. See Figuie
Installation
1. Install side marker.
2. Replace directional signal lamp.
Removal of License Plate Lamp
1. Remove adjacent tail and directiqnal signal lamp.
2. Through opening remove bumper bolts.
3. Disconnect electrical wires.
4. Remove bumper guard from 6umper.
Figure lF-18
5. Remove lamp housing. See Figure lF-19.
opening, tbe
Figure 1 F-l 9 Removing License Plate Light
1. Install lamp housing.
2. Install bumper guard in bumper.
3. Connect electrical wire.
4. Install bumper bolts.
Side Marker Light Location