Figure 7C-185
REACTION
SUN GEAR
D R U M
Figure 7C-186
Disassembly. Inspection and Reassembly of
Governor
Body
1. Depress secondary valve spring with small screw
driver and remove secondary valve spring retainer.
See Figure 7C-187.
S ,ECONDARY
Figure 7C-187
2. Remove secondary valve spring, secondary valve,
primary valve, and roll pin from governor body. See
Figure 7C-188.
GOVERNOR
SECONDARY
2.
GOVERNOR
SECONDARY
3.
GOVERNOR
SECONDARY
4.
GOVERNOR
PRIMARY
6. ROLL PIN
Figure 7C-188
Governor Body Exploded View
3. Inspect the primary and secondary valve for nicks,
burrs, etc. If necessary, use crocus cloth to remove
small burrs. Do not remove the sharp edges of the
valve since these edges perform a cleaning action
with the valve bore.
SECONDARY VALVE
VALVE
SPRING
RETAINER
VALVE
SPRING
VALVE
VALVE