Opel 1900 1973 Service Manual page 61

1 E- 40 1973 OPEL SERVICE MANUAL
Disassembly
1. Remove two (2) motor housing attaching screw$
(Item No. 4) and two (2) angle brackets (Item No.
3). See Figure lE-9.
Figure 1 E-S Removing Motor Housing Attaching
Figure 1 E-l 0 Transmission and Armature Removed
from Motor Housing
2. Remoyz transmission housing together with arma-
ture from motor housing. See Figure lE-10. It may
be necessary to hold armature in transmission hous-
ing with a screw driver.
3. Rem~ove armature from transmission housing.
4. Remove five (5) transmission housing cover
screws. See Figure lE-11.
1 E-l 1 Remove Transmission Housing Cover
5. Remove cover, gasket and driven gear from trans-
mission housing. See Figure IE-12. Remove pivot
ball from driven gear. See Figure lE-15.
Figure 1 E-l 2 Remove Driven Gear
6. If required, remove brushes.
a. To remove positive brushes, cut brush leads off at
brush holder. See Figure lE-13.
b. To remove negative brush, remove brush retaining
screw from commutator
end
1 4 .
frame. See Figure lE-