Table of Contents
Advertisement
4.1
INTRODUCTION, CONTINUED
The controller must meet the following requirements:
•
The KD6i being setup must be selected as the primary control camera on the
controller where the keyboard is connected (if using JPD100 series controllers).
•
The video from the scan must be displayed on the control monitor.
•
The controller must have manual control of the scan.
4.2
MENU STRUCTURE
The following setup tree shows the options under each menu in the main setup menu.
Use of specific menus/settings is explained in the Operation sections of the manual.
Rev. D
18
KDMU000799
02/6/04
Advertisement
Table of Contents
