Download Print this page

Honeywell HD3HDIH User Manual

Equip series indoor high resolution true day/night ip dome camera
Hide thumbs

Advertisement

Quick Links

Table of Contents
Indoor High Resolution
Document 800-07361V5 – Rev A – 07/2013
equIP
True Day/Night
IP Dome Camera
®
Series
NTSC / PAL
HD3HDIH
HD3HDIHX
HD3MDIH
HD3MDIHX
HD3MWIH
HD3MWIHX

User Guide

Advertisement

Table of Contents
loading

  Also See for Honeywell HD3HDIH

  Related Manuals for Honeywell HD3HDIH

  Summary of Contents for Honeywell HD3HDIH

  • Page 1: User Guide

    ® equIP Series Indoor High Resolution True Day/Night IP Dome Camera NTSC / PAL HD3HDIH HD3HDIHX HD3MDIH HD3MDIHX HD3MWIH HD3MWIHX User Guide Document 800-07361V5 – Rev A – 07/2013...
  • Page 2 Revisions V2 Rev A 11/2011 New version of the User Guide for HD3 H.264 cameras. Added the HD3HDIH(X) and HD3MWIH(X) models. This document replaces 800-07361V1. Added a note advising that the camera should not be connected to two different power sources at the same time. Changed how many Administrators/Users can be logged on at the same time.
  • Page 3: Table Of Contents

    Installing the Honeywell IP Utility ........31...
  • Page 4 Zoom & Focus (HD3HDIH(X) model only) ....... . . 76...
  • Page 5 Figure 3-1 Honeywell IP Utility Log On Window ......35 Figure 3-2 Honeywell IP Utility User Interface.
  • Page 6 Web Client: Administrator User of HD3MDIH(X) and HD3MWIH ....63 Figure 4-21 Web Client: Administrator User of HD3HDIH ......64 Figure 4-22 Web Client: Guest User .
  • Page 7 ® HD3 equIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide Tables Table 1-1 Fixed Mini Dome Network Camera Model Numbers ..... . 13 Table 2-1 Audio and Alarm Connector PIN Definitions .
  • Page 8 Tables...
  • Page 9: About This Document

    Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide About This Document This document introduces the Honeywell HD3 equIP Series Indoor High Resolution True Day/Night IP Dome Camera. It covers how to install and operate your camera in a network environment.
  • Page 10: Cautions And Warnings

    Cautions and Warnings THIS SYMBOL INDICATES THAT CAUTION DANGEROUS VOLTAGE RISK OF ELECTRIC CONSTITUTING A RISK OF SHOCK ELECTRIC SHOCK IS PRESENT DO NOT OPEN WITHIN THE UNIT. CAUTION: TO REDUCE THE RISK OF ELECTRIC THIS SYMBOL INDICATES THAT SHOCK, DO NOT REMOVE THE COVER. IMPORTANT OPERATING AND•...
  • Page 11: Manufacturer's Declaration Of Conformance

    Warranty and Service Subject to the terms and conditions listed on the Product warranty, during the warranty period Honeywell will repair or replace, at its sole option, free of charge, any defective products returned prepaid. Document 800-07361V5 – Rev A – 07/2013...
  • Page 12 In the event you have a problem with any Honeywell product, please call Customer Service at 1 800 323 4576 for assistance or to request a Return Merchandise Authorization (RMA) number. Be sure to have the model number, serial number, and the nature of the problem available for the technical service representative.
  • Page 13: Introduction

    Table 1-1 Fixed Mini Dome Network Camera Model Numbers Model number Description HD3HDIH True Day/Night 1080p, 3.0 – 9 mm Vari Focal Motorized Focus and Zoom Lens, NTSC HD3HDIHX True Day/Night 1080p, 3.0 – 9 mm Vari Focal Motorized Focus...
  • Page 14: Features

    Introduction Features The HD3 series camera features: Model Resolution Scan Sensor HD3HDIH(X) 1080p (1920 x 1080) 1/2.7" color CMOS progressive HD3MDIH(X) 720p (1280 x 720) 1/4” color CMOS progressive HD3MWIH(X) 720p (1280 x 720) 1/3" color CMOS progressive • Mechanical Infrared (IR) cut filter ensures excellent low light performance •...
  • Page 15: Installation And Setup

    Adjust the camera for the clearest image • Set up the camera in a network system Before You Begin Before installing the camera, Honeywell recommends that you: • Carefully read this guide and keep it for future reference. • Download the latest software updates. Go to http://www.honeywellsystems.com/support/download-center/index.html...
  • Page 16: Unpack Everything

    • One DVD containing the software and this User Guide If any parts are missing or damaged, contact the dealer from which you purchased your camera or call Honeywell Customer Service (see Warranty and Service on page 11). Equipment Required The following tools might help you to complete the installation: •...
  • Page 17 ® HD3 equIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide Step See … Adjust the camera angle, position, and Adjusting the Camera FOV (Field focus for optimum image. View), page Secure the enclosure cover. Securing the Enclosure Cover, page Program the camera.
  • Page 18: Camera Components And Functions

    Installation and Setup Camera Components and Functions Your Honeywell HD3 series camera consists of a fully-integrated enclosure with camera and lens. The wiring can be completely concealed to reduce the risk of tampering. Figure 2-1 HD3 Series Camera Components Cover plate...
  • Page 19: Camera Installation

    ® HD3 equIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide Camera Installation Preparing the Camera Rotate the dome bubble counterclockwise Skirt until it disconnects. Pull the turret to remove it. Rotate the camera counterclockwise until it disconnects from the skirt.
  • Page 20: Connecting The Wires

    Installation and Setup Pre-drill the holes as indicated on the template, using the recommended hole size for the screws being used. Note Other fasteners (preferably stainless steel) can be used, provided they are not larger than the screw holes on the mounting template. Connecting the Wires Caution Installation must be performed by a qualified electrician.
  • Page 21: Figure 2-4 Normal Alarm States

    ® HD3 equIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide Connecting Audio Your network camera supports bi-directional audio. There are two supported voice band channels that function in full duplex mode. Your camera can transmit audio from the camera to the client (PC) using any audio source that provides an industry standard line level input (see the terminal strip as depicted in Figure...
  • Page 22: Figure 2-5 Alarm Connection

    Installation and Setup Figure 2-5 Alarm Connection Alarm Audio   The alarm output can be configured to provide normally open or normally closed contacts (see Alarm Settings on page to configure the alarm output). Contacts will be rated for 12 V DC @ 0.5 A.
  • Page 23: Figure 2-6 Camera And Cables

    ® HD3 equIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide Connect to the power supply (see Figure 2-6 page 23). Plug the power supply into an appropriate power source. The LED on the RJ45 jack illuminates when the camera receives power.
  • Page 24: Figure 2-7 Wiring Connection Shown On Board

    Installation and Setup Figure 2-7 Wiring Connection Shown on Board Factory reset button Local video out connector (for aim and focus) Inside view of camera RJ45 Ethernet Connector (see Connecting to a Network via an RJ-45 Ethernet Connector, page Connecting to a Video Monitor The local video out (see Figure 2-7) is available as a test output and should be used as...
  • Page 25: Mounting The Camera

    ® HD3 equIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide Note You can connect your camera to a network or use any type of CAT5 cable to connect it directly to a PC or laptop. Mounting the Camera Surface Mount Skirt...
  • Page 26: Restore Factory Defaults

    Installation and Setup Flush Mount (with or 4S box (not supplied and optional) without 4S box) Use the screws (not supplied) to Adapter plate connect the adapter plate directly Screws to the ceiling or wall. (supplied) Use your own screws to connect Screw caps the adapter plate to the 4S box (not Camera...
  • Page 27: Figure 2-8 Gimbal Adjustment - Gimbal Top View

    Loosen the setscrew that locks the gimbal assembly in place (see Figure 2-8) to adjust the horizontal rotation. Figure 2-8 Gimbal Adjustment - Gimbal Top View HD3MDIH, HD3MWIH(X) Top view HD3HDIH(X) Top view (Auto Focus) Local Local video video Adjust focus...
  • Page 28: Adjusting The Lens Focus

    Installation and Setup Figure 2-9 Gimbal Movement Legend A = Tilt rotation B = Horizontal rotation C = Pan rotation Re-tighten the locking screw to lock the gimbal assembly in place. Note Figure 2-8 Figure 2-9 illustrates the ways in which you can adjust your camera.
  • Page 29: Figure 2-10 Holding The Dome Bubble Over The Lens

    To adjust the camera direction, view angle, and focus, connect the local video out to the video monitor using the supplied BNC video cable. Note For your HD3HDIH(X) camera, final zoom and focus adjustments can be made using the camera’s web client. See Zoom & Focus (HD3HDIH(X) model only), page 76.
  • Page 30: Securing The Enclosure Cover

    Install the dome bubble when you have set up your camera and completed the network connections (see Chapter 3, Installing the Honeywell IP Utility). Place the enclosure cover on the camera with the tabs to the left of the slots, then turn it clockwise until the tabs click securely into place.
  • Page 31: Installing The Honeywell Ip Utility

    Uninstall the IP Utility and/or Bonjour About the Honeywell IP Utility and Web Client About the Honeywell IP Utility The Honeywell IP Utility is a software application that is installed from a DVD or downloaded from the Honeywell Systems Group website (http://www.honeywellsystems.com/support/download-center/index.html). It is installed on a local workstation and primarily used by Administrators to configure the equIP Series of products residing on an IP network.
  • Page 32: Step 1: Confirm Your System Requirements

    Contact the network administrator if there are any questions regarding the local area network (LAN) or any other network related issues. Install the Honeywell IP Utility on a work station with the minimum requirements (outlined Table 3-1). After the IP Utility is installed, the same computer workstation can be used to...
  • Page 33: Step 2: Install The Honeywell Ip Utility Software

    To enable live streaming of video on the web software client. Step 2: Install the Honeywell IP Utility Software Close all other applications that might be open on your computer. Note We recommend that you disable any Norton AntiVirus software that might be running on the workstation.
  • Page 34: Finding The Equip Series User Guide

    Step 3: Log Onto the IP Utility and Discover Network Devices Double-click the Honeywell IP Utility icon on your desktop. -OR- Click Start  Programs  Honeywell Video Systems  IP Utility  Honeywell IP Utility. The Honeywell IP Utility Log On window opens.
  • Page 35: Figure 3-1 Honeywell Ip Utility Log On Window

    HD3 equIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide Figure 3-1 Honeywell IP Utility Log On Window Note If the IP Utility you are using is V49 or higher, then you will not get the credential window when logging in.
  • Page 36: Figure 3-2 Honeywell Ip Utility User Interface

    Installing the Honeywell IP Utility Figure 3-2 Honeywell IP Utility User Interface Refresh button Use the Product Filter drop-down Connect button menu to select a specific device, such as all HD3 series cameras. Disconnect button Limited/No connectivity button The About menu displays the software version installed.
  • Page 37: Step 4: Connect To A Device And Configure Network Settings

    ® HD3 equIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide Enable or disable the HTTP Server checkbox for additional security. Only an Administrator can disable (uncheck the box), resulting in the user being unable to access the web client, although video recording is unaffected.
  • Page 38: Configuring The Ip Network Settings Automatically Or Manually

    Option Description Device Name By default, the device name is the device type plus the MAC Address. Honeywell recommends, for security, that you change the device name. MAC Address The MAC address is a factory-assigned address that is unique for each device.
  • Page 39: Figure 3-3 Set The Ip Network Settings Automatically Or Manually

    ® HD3 equIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide Figure 3-3 Set the IP Network Settings Automatically or Manually Click to clear this checkbox to manually set the network details Updating IP Network Settings Automatically In the Discovery pane, select the device and click Connect From the System tab click the Obtain an IP Address automatically check box.
  • Page 40: Interfacing With The Equip Psia Device Via A Network Video Recorder

    It is important to click Apply in order to save any configuration change. Log onto the web client. There are two ways to launch the web client and log on— via the Honeywell IP Utility Program or directly from Internet Explorer. Honeywell IP Utility Log onto the Honeywell IP Utility program.
  • Page 41: Figure 3-4 Activex Prompt

    Honeywell PSIA IP ActiveX control. Figure 3-4 ActiveX Prompt Click Yes. Follow the InstallShield Wizard prompts to install the secure Honeywell PSIA IP ActiveX on your PC. The InstallShield Wizard Completed message indicates a successful ActiveX upgrade. Click Finish. The web client interface opens and live streaming video displays on the monitor.
  • Page 42: Uninstalling The Ip Utility And/Or The Bonjour Software

    Honeywell IP Utility. Click Yes. The Honeywell IP Utility is uninstalled. During the uninstallation process, you are prompted to also uninstall the Bonjour program. Click Yes to remove Bonjour or No to only uninstall the Honeywell IP Utility. Click Finish.
  • Page 43: Uninstalling The Ip Utility And/Or The Bonjour Software

    Click Next  Remove. The Honeywell IP Utility is uninstalled. During the uninstallation process, you are prompted to also uninstall the Bonjour program. Click Yes to remove Bonjour or No to only uninstall the Honeywell IP Utility. Click Finish. Document 800-07361V5 Rev A...
  • Page 44 Installing the Honeywell IP Utility...
  • Page 45: Ip Camera Web Client

    IP Camera Web Client Before you launch the Honeywell IP web client, ensure that you complete the following sections before configuring your HD3 series camera: • Chapter 2, Installation and Setup • Chapter 3, Installing the Honeywell IP Utility This chapter covers: •...
  • Page 46: About The Web Client

    Configure alarm and audio settings • Configure camera date and time settings (including time synchronization) • Remotely control lens zoom and focus [HD3HDIH(X) only] User Profiles: Web Client The web client has two user types: Administrator and Guest as described in Table 4-1.
  • Page 47: Confirming Your System Requirements

    ® HD3 equIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide Confirming Your System Requirements Ensure that your workstation meets the following minimum requirements for installing ActiveX. Table 4-2 PC Minimum Requirements for ActiveX Component Minimum Requirement Web Browser •...
  • Page 48: Figure 4-1 Windows Firewall Settings For Ie

    IP Camera Web Client Checking the Firewall Settings Note If the firewall is turned off on your PC, then please skip this section and continue with Checking the UAC Settings on page 50. If the firewall is turned on on your PC, then you can either turn it completely off, or configure it as follows: ...
  • Page 49: Figure 4-2 Allowed Programs List In Ie

    ® HD3 equIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide Figure 4-2 Allowed Programs List in IE If Internet Explorer is already in the Allowed list, then please confirm that the settings are configured as in Figure 4-2.
  • Page 50: Figure 4-3 Adding Ie To The Allowed Programs List

    IP Camera Web Client Figure 4-3 Adding IE to the Allowed Programs List Note After adding IE to the Allowed Programs list, please configure the settings as shown in Figure 4-2. Checking the UAC Settings  Click Start Control Panel to open the Control Panel. Enter UAC in the Search Control Panel.
  • Page 51: Figure 4-5 User Account Control Settings Page

    ® HD3 equIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide Figure 4-5 User Account Control Settings Page If the UAC level is not configured to the lowest level (see Figure 4-6), then please run IE as administrator, as shown in Figure 4-7 page Figure 4-6...
  • Page 52: Figure 4-7 Run Ie As Administrator

    IP Camera Web Client Figure 4-7 Run IE as Administrator Adding to Trusted Sites in IE Open the camera login page. Figure 4-8 Camera Login Page...
  • Page 53: Figure 4-9 Trusted Sites Configuration Page In Ie

    ® HD3 equIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide    Click Tools Internet Options Security Trusted Sites. Figure 4-9 Trusted Sites Configuration Page in IE Click Sites. The Trusted Sites window opens. Figure 4-10 Trusted Sites List Document 800-07361V5 Rev A...
  • Page 54: Configuring Windows Xp Service Pack 3 And Ie Security Settings

    IP Camera Web Client Click to uncheck Require server verification (https:) for all sites in the zone. • To add one camera to the Trusted Sites list, enter the URL in the Add this website to the zone: field. See Figure 4-10.
  • Page 55: Figure 4-12 Allowing Ie Through The Firewall

    ® HD3 equIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide Figure 4-12 Allowing IE through the Firewall Click OK to save the changes. Adding to Trusted Sites in IE Open the camera login page. Document 800-07361V5 Rev A 07/2013...
  • Page 56: Figure 4-13 Camera Login Page

    IP Camera Web Client Figure 4-13 Camera Login Page    Click Tools Internet Options Security Trusted Sites.
  • Page 57: Figure 4-14 Trusted Sites Configuration Page In Ie

    ® HD3 equIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide Figure 4-14 Trusted Sites Configuration Page in IE Click Sites. The Trusted Sites window opens. Figure 4-15 Trusted Sites List Document 800-07361V5 Rev A 07/2013...
  • Page 58: Logging On And Off The Ip Web Client

    Launching the Web Client from IP Utility From the desktop, double-click the Honeywell IP Utility icon -OR- Click Start  Programs  Honeywell Video Systems  IP Utility  Honeywell IP Utility. The Honeywell IP Utility Log On window opens.
  • Page 59: Figure 4-17 Launching The Web Client From The Ip Utility

    • The default Guest password is guest. Click The Honeywell IP Utility program searches for devices on the network and opens to the Honeywell IP Utility user interface. In the Discovery pane, double-click the device you want to connect to.
  • Page 60: Logging Onto The Web Client From Internet Explorer

    IP Camera Web Client Note All examples in this User Guide show the GUI for the HD3MDIH(X) model camera, unless otherwise specified. Logging Onto the Web Client from Internet Explorer From Internet Explorer (v6.0+), enter the URL (IP address of the device) in the Address bar to open the logon window.
  • Page 61: Uninstalling The Honeywell Psia Ip Activex: Microsoft Ie

    If you have a previous version of the IP ActiveX installed, you are prompted to upgrade to a later version Honeywell PSIA IP ActiveX control.
  • Page 62: Logging Out Of The Web Client

    IP Camera Web Client Logging Out of the Web Client To log out from the web client application, click Logout at the top of the web client window. Navigating the Web Client User Interface Figure 4-19 Web Client Window Layout: Administrator Log On The URL corresponds to the IP Address as Click Logout to exit the program.
  • Page 63: Figure 4-20 Web Client: Administrator User Of Hd3Mdih(X) And Hd3Mwih

    Camera Setup Configure auto exposure and white balance for the camera. Zoom & Focus Remotely adjust the zoom and focus. HD3HDIH(X) model only. Video Analytics Configure the camera tamper detection settings and view video display. IO and Audio Configure the alarm and audio settings.
  • Page 64: Live View

    IP Camera Web Client Figure 4-21 Web Client: Administrator User of HD3HDIH The menu bar displays When an alarm is Click to select the which user is logged on detected, an alarm and provides a link to log video stream.
  • Page 65: Taking A Snapshot

    Depending on the hardware installation, there is a tab called either Device Information or Device Settings. In both cases, the IP and Firmware Settings panel mirrors the information available in the Honeywell IP Utility. It provides read-only network settings, firmware settings, and video formats without having to access the IP Utility.
  • Page 66: Resetting The Device

    MAC Address is a factory assigned address unique for each device Firmware Settings including product name and version Video Output - Enable or disable local video out to a spot monitor. HD3HDIH(X) only. Note Enabling Local Video Out will disable to the secondary video stream.
  • Page 67: Compression Settings

    ® HD3 equIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide Compression Settings The video signal sent from the camera to the web client has a number of settings that can be edited which affect how the video displays in the web client. The Compression Settings tab enables you to configure these settings: •...
  • Page 68: Primary Stream Video Codec Settings

    Note If you select 1920 x 1080p resolution for the primary stream for your HD3HDIH(X) camera, you can select all the resolutions except 720p for your secondary stream. If you select 1280 x 720p resolution for the primary stream for your HD3HDIH(X) camera, you can select all the resolutions except 1080p for your secondary stream.
  • Page 69: Table 4-4 Video Streaming Resolutions - 1080P Resolution Primary Stream

    Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide Note Enabling the secondary (MJPEG) stream disables the local video out (aim and focus). (HD3HDIH(X) only) Note For HD3MDIH(X) and HD3MWIH(X) cameras, the secondary stream type is H.264 by default.
  • Page 70: Table 4-6 Video Streaming Resolutions - 1080P Resolution Secondary Stream

    Secondary Stream.) Configuring Priority Settings: Quality, Bit Rate, and Frame Rate Honeywell's H.264 cameras use efficient compression technology to provide high picture quality at minimal bandwidth. The default settings are based on typical user requirements and settings and are adequate for most scenes.
  • Page 71: Figure 4-28 Quality Settings

    ® HD3 equIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide Table 4-9 Selecting Quality, Bit Rate, or Frame Rate Select this Priority Field Setting Description field setting Quality Maximum Bit Rate The camera maintains the picture quality (see Selecting until the bit rate delivered exceeds the...
  • Page 72: Statistics: Received Bit Rate And Frame Rate

    IP Camera Web Client Selecting Frame Rate for Priority When Frame Rate is selected as the priority, you can adjust the Target Bit Rate. Figure 4-30 Frame Rate Settings Frame Rate is selected. Target Bit Rate Increasing or decreasing the target bit rate threshold will increase or decrease the picture quality accordingly.
  • Page 73: Basic Camera Setup Procedure

    ® HD3 equIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide Note You must click Apply after you make changes to any settings to save those changes. Settings are not saved unless you click Apply. Figure 4-31 Camera Setup Basic Camera Setup Procedure Aim and focus the camera using the test video output.
  • Page 74: Auto Exposure

    (HD3MDIH(X) and Adjust the ALC level to the appropriate value so that the image is HD3HDIH(X) only) correctly exposed (neither too bright nor too dark). This is recommended for indoor scenes, especially under fluorescent light.
  • Page 75: White Balance

    ® HD3 equIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide Table 4-10 Auto Exposure Settings (cont’d) Setting Options Description Day/Night Auto, Day, Night, Controls True Day/Night (TDN) operation. When Auto is selected, the Alarm Input IR-cut filter will be removed automatically in low-light scenes.
  • Page 76: Zoom & Focus (Hd3Hdih(X) Model Only)

    This setting is recommended for situations in which the light conditions are constant, so that the specified color temperature does not change. Zoom & Focus (HD3HDIH(X) model only) For your convenience, your HD3HDIH(X) camera allows you to remotely adjust the zoom and focus.
  • Page 77: Figure 4-32 Zoom & Focus Tab

    ® HD3 equIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide Figure 4-32 Zoom & Focus Tab Figure 4-33 Zoom & Focus Controls Adjust zoom Adjust focus Note When you click Reset To Default, the camera zoom and focus settings return to Tele and Far.
  • Page 78: Video Analytics

    IP Camera Web Client Video Analytics Your HD3 series camera can be configured to detect camera tamper and motion within a scene via the Video Analytics tab (see Figure 4-34). The Video Analytics tab enables a user to set the tamper detection threshold settings for blur, blinding and scene changes. Figure 4-34 Video Analytics Tab Each Tamper Detection...
  • Page 79: Tamper Detection

    ® HD3 equIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide Tamper Detection Figure 4-35 Tamper Detection Settings on the Video Analytics Tab Set the Blur Threshold. Blur can be affected by elements such as water, for example Set the Blinding Threshold.
  • Page 80: Table 4-13 Blinding Threshold Values

    IP Camera Web Client Note To turn off video blur detection, select Disable in the Blur Threshold list. Disable is the default value. Note You must click Apply after you make changes to any settings to save those changes. Settings are not saved unless you click Apply. Configuring Camera Blinding Detection An obstacle in front of the camera lens can blind the camera.
  • Page 81: Table 4-14 Scene Change Threshold Values

    ® HD3 equIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide Configuring Camera Field of View Change Detection The web client application can detect tampering of the camera field of view and show an alarm message above the video display (see Figure 4-36).
  • Page 82: Configuring Video Motion Detection

    IP Camera Web Client Configuring Video Motion Detection For motion detection, an Administrator can enable and configure up to 5 zones within a scene. The enabled and configured zones will be monitored for motion. Click the Video Analytics tab in the web client user interface. Click the Region drop-down menu in the Video Motion Detection pane, then select a region from the five available.
  • Page 83 ® HD3 equIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide Note The camera only measures motion inside the drawn region-of-interest box. So a person or vehicle moving along the boundary of the box may or may not trigger an alarm, because their motion will only be evaluated partially.
  • Page 84: Figure 4-37 Video Motion Detection Configuration - 30% Sensitivity Level

    IP Camera Web Client Decreasing VMD sensitivity If VMD alarms are triggered even when there is no motion and no large changes in the video, the following adjustments will decrease VMD sensitivity: • Increasing the sensitivity level from 30% to 50%, or from 50% to 80%. This should be the primary adjustment mechanism, because it increases the required contrast level (or amount of noise) required to trigger an alarm.
  • Page 85: Figure 4-38 Video Motion Detection Configuration - 50% Sensitivity Level

    ® HD3 equIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide Figure 4-38 Video Motion Detection Configuration - 50% Sensitivity Level Figure 4-39 Video Motion Detection Configuration - 80% Sensitivity Level Wide Field of View In a wide field of view camera, a person walking through the smaller door in the scene shown below would be expected to trigger a VMD alarm if the VMD region-of-interest box size is not larger than indicated by the red box: Document 800-07361V5 Rev A...
  • Page 86: Figure 4-40 Vmd Configuration Example - 30% Sensitivity Level For A Wide Field Of View

    IP Camera Web Client Figure 4-40 VMD Configuration Example - 30% Sensitivity Level for a Wide Field of View Figure 4-41 VMD Configuration Example - 50% Sensitivity Level for a Wide Field of View...
  • Page 87: Figure 4-42 Vmd Configuration Example - 80% Sensitivity Level For A Wide Field Of View

    ® HD3 equIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide Figure 4-42 VMD Configuration Example - 80% Sensitivity Level for a Wide Field of View For cameras with a wide-angle field of view covering a large outdoor scene, people who walk far away from the camera might appear rather small in the image.
  • Page 88: Alarm And Audio

    IP Camera Web Client Alarm and Audio Figure 4-44 Audio and IO Settings Tab Alarm Settings Connect external devices such as sirens or flashing lights to the alarm output connector to signal camera users that an alarm is activated. Set the Alarm Output as Normally Open or Normally Close.
  • Page 89: Audio Settings

    ® HD3 equIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide Figure 4-45 D/N Control Message Click OK to accept the changes to configure alarm interlock Day/Night switching. Now any alarm will be generated and appear on the web client screen. When Alarm Input is set to Normally Open When the Alarm Input is set to Normally Open, the camera is normally in Day mode if the camera alarm input connection is opened.
  • Page 90: Figure 4-46 Audio Settings

    IP Camera Web Client Figure 4-46 Audio Settings Listening to or Capturing Audio From the Camera To listen to or capture audio from the camera, enable the Camera to Client (PC) check box Listening to Audio From the Client PC To listen to audio from the client (PC), enable the Client (PC) to Camera check box.
  • Page 91: Appendix A Surface Mounting Template

    Surface Mounting Template HD3 series Cameras Surface Mounting Template Apply to a clean, dry surface, free of dust and dirt 6 Holes Use recommended drill bit as per screws (supplied) Document 800-07361V5 Rev A 07/2013...
  • Page 92 Surface Mounting Template...
  • Page 93: Appendix B Troubleshooting

    Troubleshooting Technical Support Prior to calling Honeywell technical support, refer to the following topics for possible solutions to problems with your HD3 series camera. To contact the Honeywell Video Systems technical support team, call 1-800-796-2288 (North America only) or send an e-mail to https://www.honeywellsystems.com/ss/techsupp/index.html.
  • Page 94: Problem: Live View Does Not Display The Expected Video

    Problem: Live View Does Not Display the Expected Video Possible solutions: • Ensure that your web browser settings have been configured to allow ActiveX controls (see Installing the Honeywell IP Utility on page for information on setting up your browser). •...
  • Page 95: Appendix Chd3Hdih(X) Specifications

    HD3HDIH(X) Specifications Note These specifications refer to all models, except where otherwise noted. Specifications are subject to change without notice. Video Signal Specifications NTSC Scanning System: Progressive Image Sensor: 1/2.7” CMOS Number of Pixels (H x V): 1920 x 1080 (HD); 640 x 480 (VGA) Minimum Illumination: 0.18 lux color/0.15 lux BW @ 50 IRE, F1.2...
  • Page 96 1 GB RAM (32-bit) or 2 GB RAM (64-bit) Graphics card: Display driver with Direct3D enabled (for camera IP web client only) Installation, Management, and Honeywell IP Utility software identifies the IP address, Maintenance: checks the status of the device. Firmware upgrades over HTTP, firmware available at http://www.honeywellsystems.com/support/download- center/index.html.
  • Page 97: Figure C-1 Hd3Hdih(X) Camera Side View With Dimensions

    Figure C-1 HD3HDIH(X) Camera Side View with Dimensions 4.9” (125.1 mm) Figure C-2 HD3HDIH(X) Camera Side View Dimensions without Skirt 3.9” (97.7 mm) Figure C-3 HD3HDIH(X) Camera Side View Dimensions with Adapter Plate 6.4” (161.5 mm) Document 800-07361V5 Rev A 07/2013...
  • Page 98: Figure C-4 Hd3Hdih(X) Camera Bottom View With Dimensions

    HD3HDIH(X) Specifications Figure C-4 HD3HDIH(X) Camera Bottom View with Dimensions  2.88” (73.10 mm) 4.9” (125.1 mm) Figure C-5 HD3HDIH(X) Camera Pendant Mount Option with Dimensions 0.9“ (23.0 mm) 1.8“ (46.7 mm)
  • Page 99: Appendix Dhd3Mdih(X) Specifications

    HD3MDIH(X) Specifications Note These specifications refer to all models, except where otherwise noted. Specifications are subject to change without notice. Video Signal Specifications NTSC Scanning System: Progressive Image Sensor: 1/4” CMOS Number of Pixels (H x V): 1280 x 720 (HD); 640 x 480 (VGA) Minimum Illumination: 0.25 lux color/0.22 lux BW @ 50 IRE, F1.6 0.11 lux color/0.09 lux BW @ 30 IRE, F1.6...
  • Page 100 1 GB RAM (32-bit) or 2 GB RAM (64-bit) Graphics card: Display driver with Direct3D enabled (for camera IP web client only) Installation, Management, and Honeywell IP Utility software identifies the IP address, Maintenance: checks the status of the device. Firmware upgrades over HTTP, firmware available at http://www.honeywellsystems.com/support/download- center/index.html.
  • Page 101: Figure D-1 Hd3Mdih(X) Camera Side View With Dimensions

    ® HD3 equIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide Regulatory EMC 2004/108/EC Emissions: EN 55022 Immunity: EN 50130-4 Safety: EU: 60950-1 North American ETL listed to UL/CSA 60905-1 Mounts HD3-MK1: Wall/Pendant mount bracket Figure D-1 HD3MDIH(X) Camera Side View with Dimensions 4.9”...
  • Page 102: Figure D-3 Hd3Mdih(X) Camera Side View Dimensions With Adapter Plate

    HD3MDIH(X) Specifications Figure D-3 HD3MDIH(X) Camera Side View Dimensions with Adapter Plate 6.4” (161.5 mm) Figure D-4 HD3MDIH(X) Camera Bottom View with Dimensions  2.88” (73.10 mm) 4.9” (125.1 mm)
  • Page 103: Figure D-5 Hd3Mdih(X) Camera Pendant Mount Option With Dimensions

    ® HD3 equIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide Figure D-5 HD3MDIH(X) Camera Pendant Mount Option with Dimensions 0.9“ (23.0 mm) 1.8“ (46.7 mm) Document 800-07361V5 Rev A 07/2013...
  • Page 104 HD3MDIH(X) Specifications...
  • Page 105: Appendix Ehd3Mwih(X) Specifications

    HD3MWIH(X) Specifications Note These specifications refer to all models, except where otherwise noted. Specifications are subject to change without notice. Video Signal Specifications NTSC Scanning System: Progressive Image Sensor: 1/3” CMOS Number of Pixels (H x V): 1280 x 720 (HD); 640 x 480 (VGA) Minimum Illumination: 0.14 lux color/0.1 lux BW @ 50 IRE, F1.6 Video Output (local):...
  • Page 106 1 GB RAM (32-bit) or 2 GB RAM (64-bit) Graphics card: Display driver with Direct3D enabled (for camera IP web client only) Installation, Management, and Honeywell IP Utility software identifies the IP address, Maintenance: checks the status of the device. Firmware upgrades over HTTP, firmware available at http://www.honeywellsystems.com/support/download- center/index.html.
  • Page 107: Figure E-1 Hd3Mwih(X) Camera Side View With Dimensions

    ® HD3 equIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide Figure E-1 HD3MWIH(X) Camera Side View with Dimensions 4.9” (125.1 mm) Figure E-2 HD3MWIH(X) Camera Side View Dimensions without Skirt 3.9” (97.7 mm) Figure E-3 HD3MWIH(X) Camera Side View Dimensions with Adapter Plate 6.4”...
  • Page 108: Figure E-4 Hd3Mwih(X) Camera Bottom View With Dimensions

    HD3MWIH(X) Specifications Figure E-4 HD3MWIH(X) Camera Bottom View with Dimensions  2.88” (73.10 mm) 4.9” (125.1 mm) Figure E-5 HD3MWIH(X) Camera Pendant Mount Option with Dimensions 0.9“ (23.0 mm) 1.8“ (46.7 mm)
  • Page 109: Appendix F Glossary

    Glossary AGC (Automatic Gain Control) Video Amplifier in a camera that boosts the amount of video gain (including the noise) to maintain a 1V p-p (1-volt peak-to-peak) video signal output. It becomes operational when the light level is low. The circuit is designed to compensate for fluctuations in scene illumination which would cause the video output level to be too low.
  • Page 110 Glossary NTSC (National Television Standards Committee) A standard of specifications for television transmission in the U.S., Canada, Japan, Central American, and half of South America. The North American system uses interlaced scans and 525 horizontal lines per frame at 30 frames per second. PAL (Phase Alternate Line) A standard of specifications for television transmission for color TV signals used in West Germany, England, Holland, Australia, and several other...
  • Page 111: Index

    ® HD3 equIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide Index ActiveX cabling, connecting installation camera minimum requirements adjusting UAC settings components uninstallation through IE installation ActiveX control 41, type adding, trusted sites 52, camera blinding administrator camera components privileges...
  • Page 112 connect button connecting to devices 37, gateway 38, connections GOP (group of pictures) 68, alarms group of pictures (GOP) audio guest password, default audio, alarm guest user privileges CAT5 Ethernet video monitor customer service HTTP server DayToNight declaration of conformance installation default mounting template...
  • Page 113 ® HD3 equIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide log off from the IP web client resolution logging onto an IP web client resolution, setting logging onto the IP Utility scene change threshold 78, MAC address 38, 39, security settings, ActiveX manual white balance mode...
  • Page 114 viewing live video analytics blinding threshold warnings 10, blur threshold warranty camera blinding web browser field of view change web client motion detection compression settings sabotage detection launching and logging on/off sabotage detection user types scene change threshold website 31, tamper detection Windows 7 video blurring...
  • Page 116 Document 800-07361V5 – Rev A – 07/2013 © 2013 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any means without written permission from Honeywell. The information in this publication is believed to be accurate in all respects. However, Honeywell cannot assume responsibility for any consequences resulting from the use thereof.

This manual is also suitable for:

Hd3mdihHd3mwihHd3hdihxHd3mdihxHd3mwihx