Table of Contents
Advertisement
11.7 PTZ TOUR OPERATION
PreShot commands 11, 12, and 13 are reserved for running PTZ tours 1, 2, and 3,
respectively. The scan, where the PTZ tour is stored, must be the control camera on
the system controller. The scan continues to run the PTZ tour from beginning to end
1. Enter a PreShot 11 command on the system controller to run PTZ tour 1.
(Enter a PreShot 12 command to run PTZ tour 2 or PreShot 13 command to run
PTZ tour 3.)
2. Stop the PTZ tour by manually controlling the scan or by sending the scan a
PreShot or VectorScan command.
Rev. D
77
KDMU000799
02/6/04
Advertisement
Table of Contents
