Table of Contents
Advertisement
9.7
PTZ TOUR OPERATION
PreShot commands 80, 81, and 82 are reserved for running PTZ tours 1, 2, and 3,
respectively. The scan, where the PTZ tour is stored, must be the control camera on
the system controller. The scan continues to run the PTZ tour from beginning to end.
1. Enter a PreShot 80 command on the system controller to run PTZ tour 1.
(Enter a PreShot 81 command to run PTZ tour 2 or PreShot 82 command to run
PTZ tour 3.)
2. Stop the PTZ tour by manually controlling the scan or by sending the scan a
PreShot, VectorScan, or other command.
Rev. D
70
KDMU000799
02/6/04
Advertisement
Table of Contents
