Freeze / Unfreeze Video; Flashback Operation; Preshots - Honeywell UltraDome KD6i Series User Manual

Pan and tilt mechanism containing a camera and lens
Table of Contents

Advertisement

10.4 FREEZE / UNFREEZE VIDEO

The freeze/unfreeze video function described in

10.5 FLASHBACK OPERATION

The flashback function described in

10.6 PRESHOTS

Refer to your specific controller's users manual for programming PreShots
(presets). To program a PreShot, you must be able to manually control the scan.
To send a scan to a PreShot, the scan must be the control camera on the system
controller. An operator can send a scan to a PreShot by entering the PreShot
number and the PreShot command on the system controller. To view the
PreShot video, the scan must be called up on a monitor. Refer to your controller
manual for the PreShot command.
When a scan receives a command to go to a PreShot number, it goes to the
programmed PreShot pan and tilt coordinates at 400° per second. While a Scan
is going to a PreShot position, the character generator adds the title of the
PreShot to the video signal and adds the letter A (automatic) with the camera ID
to the video signal. PreShot titles are not programmable using an American
Dynamics or Maxpro controller. The PreShot titles are PS 001, PS 002, etc.
If:
PreShot title ON
Camera ID title ON
Operator sends the scan to a PreShot
that has not been programmed
The UltraDome KD6i has a Still PreShot feature that can be enabled or disabled.
If the Still PreShot feature is on, the video is frozen between PreShots. The video
and current PreShot title remains on the current PreShot until the scan arrives at the
next PreShot then switches the video and displays the PreShot title. While the video
is frozen an asterisk (*) appears on the display on the same line as the camera ID.
Refer to
There are several PreShots reserved for scan setup, programming, and control
functions. These PreShots should not be programmed and cannot be included
in VectorScans.
Rev. D
Section 5.5.5
for enabling and disabling the Still PreShot feature.
Section 6.4
Section 6.5
is not available.
Then:
PreShot title is displayed.
Camera ID and the letter A are displayed.
The message "DOES NOT EXIST" is
displayed on the video.
72
is not available.
KDMU000799
02/6/04

Advertisement

Table of Contents
loading

Table of Contents