Exposure Control; Nightshot Control - Honeywell UltraDome KD6i Series User Manual

5.5 CAMERA OPTIONS, CONTINUED
5.5.2

Exposure Control

Select 2 to setup the lens exposure
control options.
1. Auto Exposure Level –
Select 2 to set Auto Exposure Level.
Auto Exposure Level is only
operational when the unit is in auto
exposure mode.
1.
2.
2. Backlight Compensation – Select 8
to turn backlight compensation ON or
OFF. Backlight compensation is only
operational when the unit is in auto
exposure mode.
5.5.3

NightShot Control

Select 3 to setup NightShot Options.
1. NightShot Mode – Select 1 to select
between MANUAL and AUTO
operation.
NightShot is only available in the
843216-1011 or 843216-1013
camera with IR block filter.
NightShot mode is only
operational when the unit is in
auto exposure mode.
Rev. D
Enter a value from 0 (dark/
outdoor application) to
14 (bright/indoor application.)
(Default = 7).
Select Enter.
1 Zoom and Focus
2 Exposure Control
3 NightShot Control
4 White Balance
5 Still PreShot................................. OFF
6 Vert Phase Edge............................ NA
7 Vert Phase 1-180........................... NA
ESC to Exit
EXPOSURE CONTROL
1 NA
2 Exposure Level .............................. _7
3 NA
4 NA
5 NA
5 NA
7 NA
8 Backlight Comp............................ OFF
ESC to Exit
1 Zoom and Focus
2 Exposure Control
3 NightShot Control
4 White Balance
5 Still PreShot................................. OFF
6 Vert Phase Edge............................ NA
7 Vert Phase 1-180........................... NA
ESC to Exit
NIGHTSHOT CONTROL OPTIONS
1 NightShot Mode ........................ AUTO
2 NightShot..................................... OFF
3 Activate NightShot .............. 2dB 1/60s
4 Deactivate NightShot .......... 0dB 1/60s
37
CAMERA OPTIONS
CAMERA OPTIONS
KDMU000799
02/6/04