Chapter 12
Load Balancing Command Reference
Example:
Router-N(configure)# no persistency
virtual-server virtual-slb-service persistency time Command
Use the persistency time command to set the persistency time for the virtual
SLB service.
The syntax for this command is:
persistency time <time>
time
Example:
Router-N(configure)# persistency time 3000
virtual-server virtual-slb-service no persistency time Command
Use the no persistency command to set the persistency aging time of the
virtual SLB service to the default (3600 seconds).
The syntax for this command is:
no persistency time
Example:
Router-N(configure)# no persistency time
virtual-server virtual-slb-service persistency wildcard Command
Use the persistency wildcard command to set the persistency wildcard for
the virtual SLB service. The persistency wildcard command extends the
range of client IP addresses to those which the persistency applies.
The syntax for this command is:
persistency wildcard <wildcard>
wildcard
Example:
Router-N(configure)# persistency wildcard 0.0.15.255
352
The time in seconds, an integer.
The client IP network wildcard.
Avaya P333R-LB User's Guide