Chapter 5
Cajun Campus CLI – Layer 2
Show port mirror Command
Use the show port mirror command to display mirroring information for the
stack.
The syntax for this command is:
show port mirror [<mod_num>[/<port_num>]]
Example:
P330-N> show port mirror
port mirroring
Mirroring both Rx and Tx packets from port 1/2 to port 1/4 is
enabled
Show port classification Command
Use the show port classification command to display the port classification for
console fault propagation indications. Ports can be classified as regular or valuable.
The syntax for this command is:
show port classification [module/port]
module/port
regular|valuable
Example:
P330-N# show port classification 1/15
Port
------ ---------------
1/15
60
module/port number
port classification
Port Classify
regular
Avaya P333R-LB User's Guide