Virtual-Ar-Service No Persistency Wildcard Command; Virtual-Ar-Service Rsg Command; Virtual-Ar-Service No Rsg Command - Avaya P333R-LB User Manual

virtual-ar-service no persistency wildcard Command

Use the no persistency wildcard command to set the persistency wildcard
for the virtual AR service to the default (0.0.0.0).
The syntax for this command is:
no persistency wildcard
Example:
Router-N(configure)# no persistency wildcard

virtual-ar-service rsg Command

Use the rsg command to map a real server group to the virtual AR service.
The syntax for this command is:
rsg <rsg>
rsg
Examples:
Router-N(configure)# rsg rsg1
Router-N(configure)# rsg 21

virtual-ar-service no rsg Command

Use the no rsg command to delete the mapping of a real server group from the
virtual AR service.
The syntax for this command is:
no rsg <rsg>
rsg
Examples:
Router-N(configure)# no rsg rsg1
Router-N(configure)# no rsg 21
Avaya P333R-LB User's Guide
Chapter 12
The name of the real server group, either a string of
up to 32 characters (which is the rsg-name), or an
integer from 1 to 1024 (which is the rsg-id).
The name of the real server group, either a string of
up to 32 characters (which is the rsg-name), or an
integer from 1 to 1024 (which is the rsg-id).
Load Balancing Command Reference
333