Clear Screen Command; Ping Command - Avaya P333R-LB User Manual

Clear screen Command

The clear screen command clears the current terminal display.
The syntax for this command is:
clear screen

Ping Command

Use the ping command to send ICMP echo request packets to another node on the
network.
The syntax for this command is:
ping [host[number]]
host
number
Note: You can use this command via the Master module only.
Example:
To ping the IP number 149.49.48.1 four times:
P330-N> ping 149.49.48.1 4
PING 149.49.48.1: 56 data bytes
64 bytes from 149.49.48.1: icmp_seq=0. time=0. ms
64 bytes from 149.49.48.1: icmp_seq=1. time=0. ms
64 bytes from 149.49.48.1: icmp_seq=2. time=0. ms
P330-1(super)#
----149.49.48.1 PING Statistics----
4 packets transmitted, 4 packets received, 0% packet loss
round-trip (ms)
Avaya P333R-LB User's Guide
Host IP address/Internet address of route destination. If missing
then the last host IP is used.
Number of packets to send. If missing, then the last number is used.
If the last number is not available, the default is 4.
64 bytes from 149.49.48.1: icmp_seq=3. time=0. ms
min/avg/max = 0/0/0
Chapter 5 Cajun Campus CLI – Layer 2
49