Rsg Real-Ar-Server Command; Rsg No Real-Ar-Server Command; Rsg Real-Slb-Server Command - Avaya P333R-LB User Manual

Chapter 12 Load Balancing Command Reference

rsg real-ar-server Command

Use the real-ar-server command to map a real AR server to the real server
group as well as to set the real server to use Application Redirection.
The syntax for this command is:
real-ar-server <server-ip>
server-ip
Example:
Router-N(configure)# real-ar-server 10.1.1.2

rsg no real-ar-server Command

Use the no real-ar-server command to remove a real AR server from the
real-server group.
The syntax for this command is:
no real-ar-server <server-ip>
ip-address
Example:
Router-N(configure)# no real-ar-server 10.1.1.1

rsg real-slb-server Command

Use the real-slb-server command to map a real SLB server to the real server
group as well as to set the real server to use Server Load Balancing.
The syntax for this command is:
real-slb-server <server-ip>
server-ip
Example:
Router-N(configure)# real-slb-server 10.1.1.2
310
The IP address of the real server.
The IP address of the real server.
The IP address of the real server.
Avaya P333R-LB User's Guide