Chapter 12
Load Balancing Command Reference
Real-AR-Server Commands
To configure a real server to be used by the Application Redirection (AR)
application:
1
Use the real-ar-server command to enter a real AR server context.
2
Use any of the remaining real-ar-server commands as required.
real-ar-server Command
You can also configure this command in user mode.
Use the real-ar-server command to create and/or enter a real AR server
context.
The syntax for this command is:
real-ar-server <server-ip>
server-ip
Example:
Router-N(configure)# real-ar-server 10.1.1.2
no real-ar-server Command
Use the no real-ar-server command to delete a real server from using AR.
The syntax for this command is:
no real-ar-server <server-ip>
ip-address
Example:
Router-N(configure)# no real-ar-server 10.1.1.1
real-ar-server admin-status Command
Use the admin-status command to set the administrative status to enable or
disable.
The syntax for this command is:
admin-status <enable | disable>
enable
286
The IP address of the real server.
The IP address of the real server.
Set admin status to enable.
Avaya P333R-LB User's Guide