Real-Slb-Server Admin-Status Command; Real-Slb-Server Backup Command; Real-Slb-Server No Backup Command - Avaya P333R-LB User Manual

Chapter 12 Load Balancing Command Reference

real-slb-server admin-status Command

Use the admin-status command to set the administrative status to enable or
disable.
The syntax for this command is:
admin-status <enable | disable>
enable
disable
Example:
Router-N(configure)# admin-status enable

real-slb-server backup Command

Use the backup command to set a backup real SLB server.
The syntax for this command is:
backup <r-slb-srvr-ip>
r-slb-srvr-ip
Example:
Router-N(configure)# backup 10.1.1.2

real-slb-server no backup Command

Use the no backup command to remove a backup real SLB server.
The syntax for this command is:
no backup <r-slb-srvr-ip>
r-slb-srvr-ip
Example:
Router-N(configure)# no backup 10.1.1.2
292
Set admin status to enable.
Set admin status to disable.
The IP address of the backup real SLB server.
The IP address of the backup real SLB server.
Avaya P333R-LB User's Guide