Virtual-Ar-Service No Hc Command; Virtual-Ar-Service Id Command - Avaya P333R-LB User Manual

Chapter 12 Load Balancing Command Reference
specific-id
Example:
Router-N(configure)# hc ping

virtual-ar-service no hc Command

Use the no hc command to set the health check method for the virtual AR service
to the default (auto).
The syntax for this command is:
no hc
Example:
Router-N(configure)# no hc

virtual-ar-service id Command

Use the id command to set the identification number for the virtual AR service.
The syntax for this command is:
id <v-service-id>
v-service-id
Example:
Router-N(configure)# id 21
330
The identification number of the health check.
Identification number for the virtual AR service, an
integer from 1 to 1024.
Avaya P333R-LB User's Guide