Chapter 3
Installation and Setup
Rack Mounting
The P333R-LB case fits in most standard 19-inch racks. P333R-LB is 2U
(88 mm, 3.5") high.
Place the P333R-LB in the rack as follows:
1
Snap open the ends of the front panel to reveal the fixing holes.
2
Insert the unit into the rack. Ensure that the four P333R-LB screw holes are
aligned with the rack hole positions as shown in Figure 3.1.
Figure 3.1
KEY
Hole in rack
Screw hole in Avaya P330
Screw position
3
Secure the unit in the rack using the screws. Use two screws on each side. Do
not overtighten the screws.
4
Snap close the hinged ends of the front panel.
5
Ensure that ventilation holes are not obstructed.
26
P333R-LB Rack Mounting
Avaya P333R-LB User's Guide