Ip Vrrp Auth-Key Command; Ip Vrrp Preempt Command; Ip Vrrp Primary Command - Avaya P333R-LB User Manual

Ip vrrp auth-key Command

Use the ip vrrp auth-key command to set the virtual router simple password
authentication for the virtual router ID. Use the no form of this command to disable
simple password authentication for the virtual router instance.
The syntax for this command is:
[no] ip vrrp <vr-id> auth-key <key-string>
vr-id
key-string

Ip vrrp preempt Command

Use the ip vrrp preempt command to configure the router to preempt a lower
priority master for the virtual router ID. Use the no form of this command to disable
preemption for the virtual router instance. By default, preemption is enabled.
The syntax for this command is:
[no] ip vrrp <vr-id> preempt
vr-id
Example:
Router-N(config-if:marketing)# ip vrrp 1 preempt

Ip vrrp primary Command

Use the ip vrrp primary command to set the primary address that shall be
used as the source address of VRRP packets for the virtual router ID. Use the no
form of this command to return to the default primary address for the virtual router
instance. By default, the primary address is selected automatically by the device.
The syntax for this command is:
[no] ip vrrp <vr-id> primary <ip-address>
vr-id
ip-address
Avaya P333R-LB User's Guide
Virtual Router ID (1-255)
Simple password string.
Virtual Router ID (1-255)
Virtual Router ID (1-255)
Primary IP address of the virtual router. This address
should be one of the router addresses on the VLAN.
Chapter 10 Redundancy
249