Virtual-Server Commands; Virtual-Server Command; No Virtual-Server Command - Avaya P333R-LB User Manual

Chapter 12 Load Balancing Command Reference

Virtual-Server Commands

To configure a virtual server:
1 Use the virtual-server command to create/enter a virtual server context.
2 For a new virtual server, use the id command to set the identification number
for the virtual server (see virtual-server id Command on page 345).
3 Use any of the remaining virtual-server commands as required.

virtual-server Command

Use the virtual-server command to create/enter a virtual server context.
The syntax for this command is:
virtual-server <server name>
server name
Example:
Router-N(configure)# virtual-server srvr1

no virtual-server Command

Use the no virtual-server command to delete a virtual server.
The syntax for this command is:
no virtual-server <server name>
server name
Example:
Router-N(configure)# no virtual-server srvr1
344
The name of the virtual server, a string of up to 80
characters.
The name of the virtual server, a string of up to 80
characters.
Avaya P333R-LB User's Guide