Real-Ar-Server No Hc Success-Retries Command; Real-Ar-Server Hc Timeout Command; Real-Ar-Server No Hc Timeout Command - Avaya P333R-LB User Manual

The syntax for this command is:
hc success-retries <success-retries>
success-retries
Example:
Router-N(configure)# hc success-retries 10

real-ar-server no hc success-retries Command

Use the no hc success-retries command to set the success-retries (the
number of times the real AR server should be health-checked before determining
success) to the default (1).
The syntax for this command is:
no hc success-retries
Example:
Router-N(configure)# no hc success-retries

real-ar-server hc timeout Command

Use the hc timeout command to set the amount of time after which the real AR
server is considered to have "timed out".
The syntax for this command is:
hc timeout <time-sec>
time-sec
Example:
Router-N(configure)# hc timeout 10

real-ar-server no hc timeout Command

Use the no hc timeout command to set the amount of time after which the real
AR server is considered to have "timed out" to the default (1 second).
The syntax for this command is:
no hc timeout
Example:
Router-N(configure)# no hc timeout
Avaya P333R-LB User's Guide
Chapter 12
The number of times, an integer from 1 to 32.
The amount of time in seconds, an integer.
Load Balancing Command Reference
289