Set Port Mirror Command; Set Port Classification Command - Avaya P333R-LB User Manual

Chapter 5 Cajun Campus CLI – Layer 2
Example:
P330-N# set port redundancy enable
All redundancy schemes are now enabled

Set port mirror Command

Use the set port mirror command to define a port mirroring source-
destination pair in the stack.
The syntax for this command is:
set port mirror source-port <mod_num>/<port_num> mirror-port
<mod_num>/<port_num> sampling {always|disable} direction
{rx|tx|both}
always
disable
rx
tx
both
Example:
P330-N# set port mirror source-port 1/9 mirror-port 1/10
sampling always direction both
Mirroring both Rx and Tx packets from port 1/9 to port 1/10 is
enabled

Set port classification Command

Use the set port classification command to classify the port at valuable or regular for
console fault propagation indications.
All ports are normally classified as regular, except for the 1000Base-X and 100Base-
FX ports and the LAG interfaces, which are classified as valuable.
The syntax for this command is:
set port classification[module/port]{regular|valuable}
module/port
regular|valuable
110
Keyword to activate the port mirroring entry
Keyword to change the status of the port mirroring entry to "not ready"
Keyword to copy only incoming traffic
Keyword to copy only outgoing traffic
Keyword to copy both incoming and outgoing traffic
module/port number
port classification
Avaya P333R-LB User's Guide