Set Radius Authentication Server Command; Clear Radius Authentication Server Command; Set Radius Authentication Retry-Time Command - Avaya P333R-LB User Manual

Chapter 5 Cajun Campus CLI – Layer 2
Example:
P330-N(super)# set radius authentication secret sodot

Set radius authentication server Command

Use the set radius authentication server command to set a primary or
secondary RADIUS server IP address.
The syntax for this command is:
set radius authentication server <ip-address>
<primary|secondary>
ip-addr
primary
secondary
Example:
P330-N(super)# set radius authentication server 192.168.38.12
primary

Clear radius authentication server Command

Use the clear radius authentication server command to remove a
primary or secondary RADIUS authentication server.
The syntax for this command is:
clear radius authentication server[{primary|secondary}]

Set radius authentication retry-time Command

Use the set radius authentication retry-time command to set the time
to wait before re-sending an access request.
The syntax for this command is:
set radius authentication retry time <time>
time
134
IP address of the RADIUS authentication server
default - Primary authentication server
Secondary authentication server
retry time in seconds
Avaya P333R-LB User's Guide