Set Timezone Command; Set Time Protocol; Set Ntp Server Command - Avaya P333T User Manual

To disable the automatic disconnection of idle sessions:
Cajun_P330-N# set logout 0
Sessions will not be automatically logged out.

Set timezone Command

Use the set timezone command to assign a timezone name and set the time
difference of your Avaya P330 relative to the Coordinated Universal Time (UTC/
GMT). The minutes parameter can only be set to 30.
The syntax for this command is:
set timezone <zone_name> [-]<hours>[:30]
Example:
set timezone GMT -3:30
Timezone set to 'GMT', offset from UTC is -3:30 hours

Set time protocol

Use the set time protocol command to set the protocol for use in the system as either
sntp protocol or time protocol.
The syntax for this command is:
set time protocol
Example:
Cajun_P330-N# set time protocol sntp-protocol
The protocol has been set to SNTP protocol
Cajun_P330-N#
The protocol has been set to TIME protocol

Set ntp server Command

The set ntp server command is used to set the NTP server address.
The syntax for this command is:
set ntp server <ip>
ip
Avaya P333T User's Guide
[sntp-protocol|time-protocol]
set time protocol time-protocol
IP address of the ntp server.
Chapter 6 Cajun Campus CLI – Layer 2
79