Range Ringer - Yaesu FTM-350 Series Manual

R
You may enable a specific alert ringer (
from a specified station that is within a selected range. Confirmation of whether the speci-
fied station is within communication range is verified by a bell ringer.
1. Press the [ SET ] key to enter the Set Mode.
2. Rotate the left side [ DIAL ] knob to select "APRS/PKT" group, then press the left side
[ DIAL ] knob.
3. Rotate the left side [ DIAL ] knob to select
Set Mode item "E09 APRS RINGER".
4. Press the left side [ DIAL ] knob, then ro-
tate the left side [ DIAL ] knob to select the
"7 RNG RINGER" category.
5. Press the left side [ DIAL ] knob, then rotate the left side [ DIAL ] knob to select the
desired range. Available range is "1" to "100" or "OFF".
Advice: Selects the unit of the range via Set Mode item "E12 APRS UNITS".
6. Press the left side [ DIAL ] knob to save the new setting, then press the [ ESC ] key three
times to exit from Set Mode.
:
A
You may set the backlight color which is illuminated when receiving an APRS beacon
to a desirable color for each APRS beacon via the Set Mode item "E08 APRS POPUP
COLOR"
When setting both "CALLSIGN RINGER" and "RANGE RINGER" to "ON" at the
same time, the priority is given to "CALLSIGN RINGER".
When sorting the station list with the setting of Set Mode item "E35 SORT FILTER"
set to "RNG RINGER" (described on the previous page), only the stations having this
setting will be sorted.
FTM-350 S
ERIES
ECEIVING AN
R
ANGE
Your current position
: Emits the "Normal" alert ringer
: Emits the "RNG RINGER" alert ringer
APRS ® M
ANUAL
APRS
R
INGER
) to sound when an APRS beacon is received
Selected Range
® B
EACON
31