Yaesu FTM-350 Series Manual page 33

R
I
NDICATING THE
You may confirm the Raw data of the received APRS beacon.
1. If necessary, press the [ F ] key repeatedly, until the [ SMART FUNCTION ] key's cat-
egory changes to "F-3" mode, then press the [ S LIST ] key to open the "Station List"
window.
2. Rotate the left side [ DIAL ] knob to select the APRS station which you wish to confirm
the Raw data, then press the [ ENT ] key to display its received APRS beacon.
3. Press the [ F ] key repeatedly, until the [ SMART FUNCTION ] key's category changes
to "B-2" mode, then press the [ RAW ] key to indicate the Raw data of the received
APRS beacon.
4. Rotate the left side [ DIAL ] knob to scroll through the additional lines of the received
information.
5. Press the [ BCK ] key to return to the APRS Beacon Data window.
APRS Beacon Data Window
[ RAW ] key
JQ1YBF-1
1
(2009/12/11
APNU19
DIGI (First):
DIGI (Last):
!3538.17NS13942.34E#
PHG73302/W1, TKn-N,
Fill-in DIGI MEGRO .......
:
A
Your transmitted beacon does not have digipeater information. Therefore, the DIGI
(First) and DIGI (Last) data does not appear in the APRS Beacon "RAW" Data Win-
dow.
When receiving a 3rd Party Header Beacon (generally from the I-Gate beacon), the
transceiver displays not the route data of the AX.25 packet data but the route data of the
3rd Party Header Beacon.
FTM-350 S
ERIES
ECEIVING AN
Details of the APRS Beacon "RAW" Data
FIXED
11:30) A12
APRS ® M
ANUAL
APRS
RAW P
ACKET
APRS Beacon "RAW" Data Window
[ BCK ] key
List number of the received APRS Station.
Destination Address information of the AX.25 Packet.
Callsign of the received APRS Station.
Beacon Type.
Time ( or Date ) and the baud rate that a radio re-
ceived an APRS Station.
Digipeater information.
"RAW" Data ( Text ) of the received APRS Station.
® B
EACON
D
ATA
33