Deleting A Received Beacon From The "Station List; From The "Station List" Window - Yaesu FTM-350 Series Manual

R
ECEIVING AN
D
ELETING A
F "S
ROM THE TATION
1. If necessary, press the [ F ] key repeatedly, until the [ SMART FUNCTION ] key's cat-
egory changes to "F-3" mode, then press the [ S LIST ] key to open the "Station List"
window.
2. Press the [ F ] key repeatedly, until the
[ SMART FUNCTION ] key's category
changes to "S-2" or "S-3" mode.
3. Rotate the left side [ DIAL ] knob to select
the beacon station to be deleted.
4. Press the [ DEL ] key, then press the [ OK? ]
key to delete the selected beacon station
from the "Station List".
F "APRS B
ROM THE
1. If necessary, press the [ F ] key repeatedly, until the [ SMART FUNCTION ] key's cat-
egory changes to "F-3" mode, then press the [ S LIST ] key to open the "Station List"
window.
2. Rotate the left side [ DIAL ] knob to select
the beacon station to be deleted.
3. Press the [ ENT ] key to display the received
data, then confirm that you really want to
erase this beacon data.
4. Press the [ DEL ] key, then press the [ OK? ]
key to delete the selected beacon station
from the "Station List".
The FTM-350 Series transceiver enables you to store up to 100 stations into the
"Station" list.
If a Station list becames full (100 stations) and the transceiver receives a new bea-
con, the first station's data is deleted from the Station list, and its station's data is
stored into the Station list (first-in, first-out mode).
34
APRS
R B
ECEIVED EACON FROM THE
L " W
IST INDOW
D
EACON ATA
® B
EACON
" W
INDOW
FTM-350 S
"S L
TATION IST
APRS ® M
ERIES
"
ANUAL