Yaesu FTM-350 Series Manual page 65

OBJECT:
ITEM:
STATUS:
OTHER:
RANGE LIMIT:
ALTNET:
E04: APRS MESSAGE TXT
Function:
E05: APRS MODEM
Function:
Available Values:
Default:
When this item is set to "ON", the "A12" (for 1200 bps packet) or "A96" (for 9600 bps
packet) icon appears in the display.
E06: APRS MUTE
Function:
Available Values:
Default:
When this item is set to "ON", the "A12" or "A96" icon in the display blinks.
E07: APRS POPUP
Function: Sets the timer parameter of the pop-up window.
Available Values:
Default:
FTM-350 S
ERIES
APRS/PKT S
When this item is set to "ON", the transceiver shows the stations which
send an Object Beacon.
When this item is set to "ON", the transceiver shows the stations which
send an Item Beacon.
When this item is set to "ON", the transceiver shows the stations which
send a Status Beacon.
When this item is set to "ON", the transceiver shows the stations which
send a packet signal except an APRS beacon.
When this item is set to "ON", the transceiver shows the stations which
are inside of the range limit setting.
When this item is set to "ON", the transceiver shows the stations which
include the Destination Address by the Alternate Nets.
Programming a Fixed form APRS message. See page 57 for details.
Enables/Disables the APRS modem (AX.25 Data modem).
OFF or ON
OFF
Enables/Disables audio output of the "APRS Operation Band" during
APRS operation.
OFF or ON
OFF
1 BEACON: OFF, 1 ~ 30 sec, or CONTINUOUS
2 MESSAGE: OFF, 1 ~ 30 sec, or CONTINUOUS
3 MY PKT: ON or OFF
1 BEACON: 10 sec
2 MESSAGE: 10 sec
3 MY PKT: OFF
APRS ® M
ANUAL
M
ET ODE
65