Add Frequency Range; Sort - Yaesu ADMS-12 Instruction Manual

• Add Frequency Range

New channels may be created in designated frequency steps from the starting frequency by clicking the
left mouse button on the "Add Frequency Range" parameter in the "Edit" menu. The "Add Frequency
Range" window will open.
A specified number of memory channels may be created, beginning from the starting frequency in the
specified frequency steps.
Starting Frequency: Enter the lower frequency
Number of Channel: Enter the number of channels
Frequency Step:
Click the [OK] button to create the additional specified memory channels.
* The 8.33 kHz step is available only when receiving on the Air band (108-136.995 MHz).

• Sort

Click the "Sort" parameter in the "Edit" menu, the "Sort" window will open.
Sort by:
Then sort by:
Sort Mode:
Channels Sort Selection: Set whether to sort the selected channel column(s) or to sort all channel col-
Enter the desire frequency step
Select the first parameter for sorting items such as the order of frequencies.
Select the second parameter for sorting.
Set to sort in ascending or descending order.
umns.
Click the [Sort] button to initiate the sorting according to the above instructions.
The data may be restored to the previous order by using the "Undo" command.
16