Yaesu FTM-350 Series Manual page 14

R
ECEIVING AN
D
Press the [ F ] key repeatedly, until the [ SMART FUNCTION ] key category changes to the
"F-3" mode, which is assigned to the functions necessary for APRS operation.
BEACON TX
Baud Rate ( APRS )
Unread Message
Baud Rate ( DATA )
APRS Band
DATA Band
FWD
BCK
SET
DIAL
S LIST
MSG
BCON
B-TX
PTT
B
F
:
A
If you select the cross band operation of the APRS or Data operation via Set Mode item
"E17 DATA BAND SELECT" in the "APRS/PKT" group, the "APRS Band" icon (
or the "DATA Band" icon (
Ar: APRS RX Band / At: APRS TX Band
Dr: DATA mode RX Band / Dt: DATA mode TX Band
14
APRS
& S
ISPLAY WITCHES R
D
No Icon: Disables the Automatic APRS Beacon Transmission Feature.
" " Icon: Enables the Automatic APRS Beacon Transmission Feature.
" " Icon: Activates the SmartBeaconing Feature.
Indicates the Baud Rate of the APRS function. ( The indication example is "1200 bps" )
Indicates that there is an unread message.
Indicates the Baud Rate of the DATA jack. ( The indication example is "9600 bps" )
Indicates the operating band for the APRS operation.
Indicates the operating band for the DATA operation.
K
Press the key: Changes the operating function page.
Press and hold the key: Toggle the display between "Dual Band" and "Mono Band".
Press the key: Changes the operating function page.
Press and hold the key: Toggle the display between "Dual Band" and "Mono Band".
Access the Set Mode.
Selects the operating frequency.
Jump to the "Station List" window.
Jump to the "Message List" window.
Changes the APRS beacon: OFF, ON, or SMART.
Transmit the APRS beacon.
Transmit PTT VHF/UHF radio.
Changes the operating band.
Changes the current function of the [ SMART FUNCTION ] key.
) changes as follows:
® B
EACON
ADIO
I
ISPLAY CON
F
EY UNCTION
FTM-350 S
W
INDOW
APRS ® M
ERIES
)
ANUAL