Yaesu FTM-350 Series Manual page 9

S
ELECT THE
This paragraph selects the baud rate of the APRS function. When selecting a baud rate of
"1200 bps", you may operate APRS using AFSK 1200 bps packet. When selecting a baud
rate of "9600 bps", you may operate APRS using GMSK 9600 bps packet.
1. Press the [ SET ] key to enter the Set Mode.
2. Rotate the left side [ DIAL ] knob to select "APRS/PKT" group, then press the left side
[ DIAL ] knob.
3. Rotate the left side [ DIAL ] knob to select
Set Mode item "E18 DATA SPEED".
4. Press the left side [ DIAL ] knob, then ro-
tate the left side [ DIAL ] knob to select "1:
APRS".
5. Press the left side [ DIAL ] knob, then rotate the left side [ DIAL ] knob to select the
desired baud rate ("1200 bps" or "9600 bps").
6. Press the left side [ DIAL ] knob to save the new setting, then press the [ ESC ] key three
times to exit from Set Mode.
:
A
An "A12" icon (for 1200 bps packet) or "A96" icon (for 9600 bps packet) appears on
the display in accordance with the baud rate of the APRS which you select.
When the Set Mode item "E08 APRS MUTE" is set to "ON", the audio output of the
"APRS Operation Band" is muted and the "A12" or "A96" icon will blink, during
APRS operation.
FTM-350 S
ERIES
B R
AUD ATE OF THE
APRS ® M
ANUAL
P
REPARATIONS
APRS F
"A12" or "A96"
UNCTION
9