Activate The Aprs Function - Yaesu FTM-350 Series Manual

P
REPARATIONS
1. Press the [ SET ] key to enter the Set Mode.
2. Rotate the left side [ DIAL ] knob to select "APRS/PKT" group, then press the left side
[ DIAL ] knob.
3. Rotate the left side [ DIAL ] knob to select
Set Mode item "E05 APRS MODEM".
4. Press the left side [ DIAL ] knob, then ro-
tate the left side [ DIAL ] knob to select
"ON".
5. Press the left side [ DIAL ] knob to save the new setting, then press the [ ESC ] key twice
to exit from Set Mode.
To disable the APRS function, select "OFF" in step 4 above.
:
A
When the APRS function is activated, a small "A" icon appears at the right side of the
S-meter on the "Sub" band frequency display.
8
A
CTIVATE THE
APRS F
UNCTION
"A" icon
FTM-350 S APRS ® M
ERIES ANUAL