Yaesu FTM-350 Series Manual page 62

APRS/PKT S
S M I
ET ODE TEM
E16 COM PORT SETTING
E17 DATA BAND SELECT
E18 DATA SPEED
E19 DATA SQUELCH
E20 DIGI PATH SELECT
E21 DIGI PATH 1
E22 DIGI PATH 2
E23 DIGI PATH 3
E24 DIGI PATH 4
E25 DIGI PATH FULL 1
E26 DIGI PATH FULL 2
E27 MESSAGE GROUP
E28 MESSAGE REPLY
E29 MY CALLSIGN
62
M
ET
F
UNCTION
Sets the COM port setting.
Selects the operating band for APRS and DATA
operation.
Selects the Baud Rate for APRS and DATA op-
eration.
Configure the Squelch settings for APRS, DATA
and TX.
Selects the APRS packet path you wish to path
through.
Sets the APRS packet path.
Sets the APRS packet path.
Sets the APRS packet path.
Sets the APRS packet path.
Sets the APRS packet path.
Sets the APRS packet path.
Sets the filter type option allowing you to receive
only specified types of APRS Group/Bulletin mes-
sage information.
Enable/Disable the message reply feature, and
program its details.
Program your callsign.
ODE
1 SPEED:
2 OUTPUT:
3 INPUT:
4 WP FORMAT: NMEA9 / NMEA8 /
5 WP FILTER: ALL / MOBILE /
1 APRS: MAIN BAND / SUB BAND /
2 DATA: MAIN BAND / SUB BAND /
1 APRS: 1200 bps / 9600 bps
2 DATA: 1200 bps / 9600 bps
1 APRS: RX BAND / TX/RX BAND
2 DATA: RX BAND / TX/RX BAND
3 TX:
OFF / WIDE1-1 / WIDE1-1, WIDE2-1 /
PATH1 / PATH2 / PATH3 / PATH4 /
(up to 2 Digipeater Addresses)
(up to 2 Digipeater Addresses)
(up to 2 Digipeater Addresses)
(up to 2 Digipeater Addresses)
(up to 8 Digipeater Addresses)
(up to 8 Digipeater Addresses)
1 GROUP1: ALL
2 GROUP2: CQ
3 GROUP3: QST
4 GROUP4: YAESU
5 GROUP5:
6 GROUP6:
7 BULLETN1: BLN?
8 BULLETN2: BLN?
9 BULLETN3: BLN?
1 REPLY:ON / OFF
2 CALLSIGN:
3 TEXT:
FTM-350 S
ERIES
A V
VAILABLE ALUES
( D )
: B
EFAULT OLD
4800bps / 9600bps /
19200bps
OFF / GPS OUT /
PACKET /
WAYPOINT
OFF / GPS IN
NMEA7 / NMEA6
FREQ / OBJ/ITEM /
DIGI / VOIP /
WEATHER /
YAESU /
C RINGER /
R RINGER
L-BAND FIX / R-BAND FIX /
L=TX/R=RX / L=RX/R=TX
L-BAND FIX / R-BAND FIX /
L=TX/R=RX / L=RX/R=TX
ON / OFF
FULL1 / FULL2
-
- NN
APRS ® M
ANUAL