Yaesu FTM-350 Series Manual page 75

E25: DIGI PATH FULL 1
Function:
Program the address information (callsign or alias etc) of the digipeater that you selected as
"FULL 1" in Set Mode item "E20 DIGI PATH SELECT" (8 path).
E26: DIGI PATH FULL 2
Function:
Program the address information (callsign or alias etc) of the digipeater that you selected as
"FULL 2" in Set Mode item "E20 DIGI PATH SELECT" (8 path).
E27: MESSAGE GROUP
Function:
Available Values:
E28: MESSAGE REPLY
Function:
Available Values:
Default:
REPLY:
CALLSIGN:
TEXT:
E29: MY CALLSIGN
Function:
FTM-350 S
ERIES
APRS/PKT S
Sets the APRS packet path.
Sets the APRS packet path.
Sets the filter type option allowing you to receive only the specified
types of APRS Group/Bulletin Message information.
1 GROUP1: ALL
2 GROUP2: CQ
3 GROUP3: QST
4 GROUP4: YAESU
5 GROUP5:
6 GROUP6:
7 BULLETN1: BLN?
8 BULLETN2: BLN?
9 BULLETN3: BLN?
Enable/Disable the automatic message reply feature, and program its
details.
1 REPLY: OFF or ON
2 CALLSIGN:
3 TEXT:
1 REPLY: OFF
2 CALLSIGN:
3 TEXT:
When this item is set to "ON", the transceiver transmits the reply mes-
sage (determined from the TEXT item) automatically when an APRS
message is received.
Program the callsign here when you wish to reply to a specific station
only.
Enter the reply message.
Program your callsign. See page 2 for details.
APRS ® M
ANUAL
ET
-
-
M
ODE
75